Li-Fi (/'la?fa?/; short for light fidelity) is a technology for wireless communication between devices using light to transmit data. In its present state only LED lamps can be used for the transmission of visible light. The term was first introduced by Harald Haas during a 2011 TEDGlobal talk in Edinburgh. In technical terms, Li-Fi is a visible light communications system that is capable of transmitting data at high speeds over the visible light spectrum, ultraviolet and infrared radiation.
In terms of its end use the technology is similar to Wi-Fi. The key technical difference is that Wi-Fi uses radio frequency to transmit data. Using light to transmit data allows Li-Fi to offer several advantages like working across higher bandwidth, working in areas susceptible to electromagnetic interference (e.g. aircraft cabins, hospitals) and offering higher transmission speeds. The technology is actively being developed by several organisations across the globe.
Maps, Directions, and Place Reviews
Technology details
This OWC technology uses light from light-emitting diodes (LEDs) as a medium to deliver networked, mobile, high-speed communication in a similar manner to Wi-Fi. The Li-Fi market is projected to have a compound annual growth rate of 82% from 2013 to 2018 and to be worth over $6 billion per year by 2018.
Visible light communications (VLC) works by switching the current to the LEDs off and on at a very high rate, too quick to be noticed by the human eye. Although Li-Fi LEDs would have to be kept on to transmit data, they could be dimmed to below human visibility while still emitting enough light to carry data. The light waves cannot penetrate walls which makes a much shorter range, though more secure from hacking, relative to Wi-Fi. Direct line of sight is not necessary for Li-Fi to transmit a signal; light reflected off the walls can achieve 70 Mbit/s.
Li-Fi has the advantage of being useful in electromagnetic sensitive areas such as in aircraft cabins, hospitals and nuclear power plants without causing electromagnetic interference. Both Wi-Fi and Li-Fi transmit data over the electromagnetic spectrum, but whereas Wi-Fi utilizes radio waves, Li-Fi uses visible light, Ultraviolet and Infrared. While the US Federal Communications Commission has warned of a potential spectrum crisis because Wi-Fi is close to full capacity, Li-Fi has almost no limitations on capacity. The visible light spectrum is 10,000 times larger than the entire radio frequency spectrum. Researchers have reached data rates of over 224 Gbit/s, which was much faster than typical fast broadband in 2013. Li-Fi is expected to be ten times cheaper than Wi-Fi. Short range, low reliability and high installation costs are the potential downsides.
PureLiFi demonstrated the first commercially available Li-Fi system, the Li-1st, at the 2014 Mobile World Congress in Barcelona.
Bg-Fi is a Li-Fi system consisting of an application for a mobile device, and a simple consumer product, like an IoT (Internet of Things) device, with color sensor, microcontroller, and embedded software. Light from the mobile device display communicates to the color sensor on the consumer product, which converts the light into digital information. Light emitting diodes enable the consumer product to communicate synchronously with the mobile device.
History
Professor Harald Haas coined the term "Li-Fi" at his 2011 TED Global Talk where he introduced the idea of "wireless data from every light". He is a Chair Professor of Mobile Communications at the University of Edinburgh, and the co-founder of pureLiFi.
The general term "visible light communication" (VLC), whose history dates back to the 1880s, includes any use of the visible light portion of the electromagnetic spectrum to transmit information. The D-Light project at Edinburgh's Institute for Digital Communications was funded from January 2010 to January 2012. Haas promoted this technology in his 2011 TED Global talk and helped start a company to market it. PureLiFi, formerly pureVLC, is an original equipment manufacturer (OEM) firm set up to commercialize Li-Fi products for integration with existing LED-lighting systems. Oledcomm, French company founded by Pr Suat Topsu from Paris-Saclay University.
In October 2011, companies and industry groups formed the Li-Fi Consortium, to promote high-speed optical wireless systems and to overcome the limited amount of radio-based wireless spectrum available by exploiting a completely different part of the electromagnetic spectrum.
A number of companies offer uni-directional VLC products, which is not the same as Li-Fi - a term defined by the IEEE 802.15.7r1 standardization committee.
VLC technology was exhibited in 2012 using Li-Fi. By August 2013, data rates of over 1.6 Gbit/s were demonstrated over a single color LED. In September 2013, a press release said that Li-Fi, or VLC systems in general, do not require line-of-sight conditions. In October 2013, it was reported Chinese manufacturers were working on Li-Fi development kits.
In April 2014, the Russian company Stins Coman announced the development of a Li-Fi wireless local network called BeamCaster. Their current module transfers data at 1.25 gigabytes per second (GB/s) but they foresee boosting speeds up to 5 GB/s in the near future. In 2014 a new record was established by Sisoft (a Mexican company) that was able to transfer data at speeds of up to 10 GB/s across a light spectrum emitted by LED lamps.
Recent integrated CMOS optical receivers for Li-Fi systems are implemented with avalanche photodiodes (APDs) which has a low sensitivity. In July 2015, IEEE has operated the APD in Geiger-mode as a single photon avalanche diode (SPAD) to increase the efficiency of energy-usage and makes the receiver more sensitive. This operation could be also performed as quantum-limited sensitivity that makes receivers able to detect weak signals from a far distance.
Standards
Like Wi-Fi, Li-Fi is wireless and uses similar 802.11 protocols, but it uses ultraviolet, infrared and visible light communication (instead of radio frequency waves), which has much bigger bandwidth.
One part of VLC is modeled after communication protocols established by the IEEE 802 workgroup. However, the IEEE 802.15.7 standard is out-of-date: it fails to consider the latest technological developments in the field of optical wireless communications, specifically with the introduction of optical orthogonal frequency-division multiplexing (O-OFDM) modulation methods which have been optimized for data rates, multiple-access and energy efficiency. The introduction of O-OFDM means that a new drive for standardization of optical wireless communications is required.
Nonetheless, the IEEE 802.15.7 standard defines the physical layer (PHY) and media access control (MAC) layer. The standard is able to deliver enough data rates to transmit audio, video and multimedia services. It takes into account optical transmission mobility, its compatibility with artificial lighting present in infrastructures, and the interference which may be generated by ambient lighting. The MAC layer permits using the link with the other layers as with the TCP/IP protocol.
The standard defines three PHY layers with different rates:
- The PHY 1 was established for outdoor application and works from 11.67 kbit/s to 267.6 kbit/s.
- The PHY 2 layer permits reaching data rates from 1.25 Mbit/s to 96 Mbit/s.
- The PHY 3 is used for many emissions sources with a particular modulation method called color shift keying (CSK). PHY III can deliver rates from 12 Mbit/s to 96 Mbit/s.
The modulation formats recognized for PHY I and PHY II are on-off keying (OOK) and variable pulse position modulation (VPPM). The Manchester coding used for the PHY I and PHY II layers includes the clock inside the transmitted data by representing a logic 0 with an OOK symbol "01" and a logic 1 with an OOK symbol "10", all with a DC component. The DC component avoids light extinction in case of an extended run of logic 0's.
The first VLC smartphone prototype was presented at the Consumer Electronics Show in Las Vegas from January 7-10 in 2014. The phone uses SunPartner's Wysips CONNECT, a technique that converts light waves into usable energy, making the phone capable of receiving and decoding signals without drawing on its battery. A clear thin layer of crystal glass can be added to small screens like watches and smartphones that make them solar powered. Smartphones could gain 15% more battery life during a typical day. The first smartphones using this technology should arrive in 2015. This screen can also receive VLC signals as well as the smartphone camera. The cost of these screens per smartphone is between $2 and $3, much cheaper than most new technology.
Philips lighting company has developed a VLC system for shoppers at stores. They have to download an app on their smartphone and then their smartphone works with the LEDs in the store. The LEDs can pinpoint where they are located in the store and give them corresponding coupons and information based on which aisle they are on and what they are looking at.
Home and building automation
It is predicted that future home and building automation will be highly dependent on the Li-Fi technology for being secure and fast. As the light cannot penetrate through walls, the signal cannot be hacked from a remote location.
Applications
Security
In contrast to radio frequency waves used by Wi-Fi, lights cannot penetrate through walls and doors. This makes it more secure and makes it easier to control who can connect to a network. As long as transparent materials like windows are covered, access to a Li-Fi channel is limited to devices inside the room.
Underwater application
Most remotely operated underwater vehicles (ROVs) use cables to transmit command, but the length of cables then limits the area ROVs can detect. However, as a light wave could travel through water, Li-Fi could be implemented on vehicles to receive and send back signals.
While it is theoretically possible for Li-Fi to be used in underwater applications, its utility is limited by the distance light can penetrate water. Significant amounts of light do not penetrate further than 200 meters. Past 1000 meters, no light penetrates.
Hospital
Many treatments now involve multiple individuals, Li-Fi system could be a better system to transmit communication about the information of patients. Besides providing a higher speed, light waves also have little effect on medical instruments and human bodies.
Vehicles
Vehicles could communicate with one another via front and back lights to increase road safety. Also street lights and traffic signals could also provide information about current road situations.
Industrial automation
Anywhere in industrial areas data has to be transmitted, Li-Fi is capable to replace slip rings, sliding contacts and short cables, such as Industrial Ethernet. Due to real time capability of Li-Fi, which is often required for automation processes,it is also an alternative to common industrial Wireless LAN standards.
Commercialization
There are many companies and organisations around the world developing this technology:
- pureLiFi is a technology company based in Edinburgh, co-founded by Harald Haas and Mostafa Afghani. They introduced the world's first LiFi dongle at Mobile World Congress in 2016. They have also collaborated with French company Lucibel to launch the world's first integrated luminaire.
- VLNComm is a US based company that has developed Li-Fi products. It introduced LumiNex, the world's first Li-Fi lighting panel at CES 2018, which provides high-speed Li-Fi connectivity for an area of size more than 500 sq ft (48 sq meter). VLNComm's Li-Fi USB adapter, LumiStick 2 is used to connect electronic devices to Li-Fi networks.
- OLEDComm is a French company founded by, Suat Topsu. It provides products for indoor positioning and bidirectional modems at 2 Mbit/s able to operate with mass-market LEDs.
- i2cat, located in Barcelona, Spain, is developing location based services.
- LightPointe, known for point-to-point gigabit Ethernet free space optics and hybrid optical-radio bridges, are developing this technology through Firefly Wireless Networks.
- ByteLight, which has been acquired by the LED manufacturer Acuity Brands.
- Nakagawa Lab, Japan.
- Velmenni Research and Development Pvt Ltd, in Estonia and India.
- Zero.1, in Dubai, uses urban LED street lighting for communications infrastructure.
- Axrtek, USA.
- Fraunhofer IPMS in Dresden, Germany: Scientists of the research area Wireless Microsystems developing Li-Fi technology modules for industry customers, mainly for industrial automation applications.
- AASA, Inc is a US-based solutions integrator that specializes in customized LiFi solutions including Internet access, visible light positioning, secure mobile communications, and Internet of Things (IoT).
- Qualcomm, GE, Panasonic, Philips, Samsung, OSRAM and Cree, are among the larger corporations who are entertaining this technology.
Source of the article : Wikipedia
EmoticonEmoticon